WRAG Basic XL Series Hydraulic Post Drivers -- Iowa Farm Equipment

WRAG 'Basic XL300' Series Hydraulic Post Drivers
Loaded With The Best Features, Plus Offset Positioning & Hydraulic Center Leg!
(Available as Skid Steer Quick Attach)

'Basic XL300' 90° Swing, Telescoped, with Rock Spike With the 90° Swing, Telescoping Offset Positioning, 4-Way Tilt & Hydraulic Center Leg Adjustment, Driving Posts on the Fence Center-Line is Efficient & Hassle Free, Eliminating the Need for (Repeatedly) Repositioning your Tractor for Precise Positioning. The 110,000lb’s of Hammering Force also Contributes to Efficiency & Straight Posts, Even in the Toughest Ground Conditions. For the Worst Ground Conditions, an Optional Rock Spike is available - WRAG Drivers include the Extra Spool Valve & Mounting Lugs (for the Rock Spike & Extractor) as Standard Features. The 'Basic XL300’ Driver includes the following Standard Features: Hydraulic Mast Positioning: 90° Swing, from Rear Center to Right, Infinite Positioning. Telescoping Boom, Horizontal, up to 15” w/Infinite Positioning. Functional Anywhere in the 90° Swing. 'Front to Rear' & 'Left to Right' Tilt! Hydraulic Center Leg Adjustment. Open Frame Design: Provides maximum efficiency, versatility & flexibility, on any terrain, for positioning the Post to be as straight as possible! Allows adding new posts into existing fence lines without contacting & damaging the existing fence wires! Allows Driving Posts as Low as 6” Above Grade! Self-Contained Hydraulic System: Eliminates the clumsy & costly Return Line Kit (a nuisance to add & remove & route to the reservoir filler neck)! Eliminates the risk of discharging hydraulic oil all over the back of Tractor (from the Return Line Kit)! Without the need of a model specific Return Line Kit, this Driver is universal to use on any make & model of Tractor! 110,000lb's of (Springless) Drop Hammer Pounding Force: The Drop Hammer System provides Springless Driving Energy, eliminating daily maintenance (seasoning), and the potential disruption & expense associated with Spring failures! WRAG's Drop Hammer System uses an Industrial Poly & Cotton Braided Rope, which is very easy on your hands & won’t kink, or fray, offering a trouble free service life! Hinged 'Arm' for the Drop Hammer Operation: Hinged 'Arms' are superior to Hinged ‘Masts’, which are a nuisance to set-up, require more pulleys & increases maintenance, and contributes to a loss of driving force! Flow Control Valve: Used to reduce the Hinged Arm cycle time for smoother operation, or to speed it up for faster operation (once you’re able to throttle & feather the controls)! Cat 2 Quick-Hitch Compatibility! Controls Located for Maximum Safety & Ergonomic Convenience!
'Basic XL300' 90° Swing, Telescoped, with Rock Spike
'Basic XL300' Centered, Telescoped, w/Rock Spike	'Basic XL300' Centered, Telescoped, w/Rock Spike
'Basic XL300' 90° Swing, Telescoping Retracted, w/Rock Spike	'Basic XL300' 90° Swing, Telescoped, w/Rock Spike
'Basic XL300' 90° Swing, Fully Telescoped, w/Rock Spike 'Basic XL300' Centered, Telescoped, w/Rock Spike
'Basic XL300' Centered, Retracted, Tilted Forward	'Basic XL300' Centered, Retracted, Tilted Forward
'Basic XL300' Centered, Telescoping Retracted, Tilted Back	'Basic XL300' Centered, Telescoping Retracted, Tilted Back
'Basic XL300' Centered, Telescoping Retracted, Tilted Left	'Basic XL300' Centered, Telescoping Retracted, Tilted Right
'Basic XL300' 90° Swing, Telescoped, Tilted Left, w/Rock Spike	'Basic XL300' 90° Swing, Telescoped, Tilted Right, w/Rock Spike
'Basic XL300' Centered, Telescoping Retracted, w/Rock Spike	'Basic XL300' Centered, Telescoped, w/Rock Spike
'Basic XL300' Telescoping Cylinder Retracted	'Basic XL300' Telescoping Cylinder Extended
'Basic XL300' Hydraulic Control Levers
'Basic XL300' Optional Rock Spike & Extractor Kit	'Basic XL300' Optional Wire Unroller

'BASIC XL300' 3-POINT POST DRIVER
Max. Post Length w/36" Legs Fully Extended	9'-0" Post (Drives down to 30" Above Grade) (/*)
Max. Post Length w/Legs Fully Retracted	8'-0" Post (Drives down to 18" Above Grade) (/*)
Max. Post Diameter	10"
Drop Hammer Weight	660 lbs.
Driving Force	110,000 lbs. @ Full Stroke
Mast Length	10'-8" w/Legs Retracted
Hydraulic Tilt	22° Left & Right, Front & Rear
Hydraulic Swing	90° (Infinite Positioning)
Hydraulic Telescoping	15" Travel (Infinite Positioning)
Hydraulic Requirement	Min 12GPM/1800PSI
Hydraulic Systems	Open Center (Plugs for Closed & Load Sensing Available)
Weight	1,940 lbs.
3-Point Hitch	Double Clevis, CAT 2 Double Top Link Lugs for Quick Hitch Compatibility. Not Suitable for Cat 1 Tractors!
NOTES: Dimensions are Conservative & Subject to Variation Based on Tractor 3-Point & Tire Sizes. *Dimensions are as Measured on a 75HP Tractor w/30" Rear Tires.

Specifications & Designs Are Subject to Change Without Notice